GENERAL SAFETY INSTRUCTIONS
FOR POWER TOOLS
WARNING
Please read the following instructions carefully, failure to do so could lead to serious personal injury.
IMPORTANT
Draper Tools Limited recommends that this machine should not be modified or used for any application other than that for which it was designed. If you are unsure of its relative applications do not hesitate to contact us in writing and we will advise you.
1.KNOW YOUR POWER TOOL
Read and understand the owner's manual and labels affixed to the tool. Learn its application and limitations as well as the specific potential hazards peculiar to this tool.
2.KEEP WORK AREA CLEAN
Cluttered areas and benches invite accidents. Floors must not be slippery due to oil or sawdust.
3.AVOID DANGEROUS ENVIRONMENTS
Do not use power tools in damp or wet locations, or expose them to rain. Keep work area well lit. Provide adequate space surrounding the work area. Do not use in environments with a potentially explosive atmosphere.
4.KEEP CHILDREN AWAY
All visitors should be kept a safe distance from work area.
5.STORED TOOLS
When not being used, all tools should be stored in a dry, locked cupboard or out of the reach of children.
6.WEAR PROPER CLOTHING
Do not wear loose clothing, neckties or jewellery (rings, wristwatches) to catch in moving parts. NONSLIP footwear is recommended.Wear protective hair covering to contain long hair. Roll long sleeves above the elbow.
7.USE SAFETY GOGGLES (Head Protection)
Wear CE approved safety goggles at all times. Normal spectacles only have impact resistant lenses, they are NOT safety glasses. Also, use face or dust mask if application is dusty and ear protectors (plugs or muffs) during extended periods of operation.
8.NOISE LEVELS
Some types of machines may have high noise levels when working. In such cases ear protection must be worn.
9.VIBRATION LEVELS
Hand held power tools produce different vibration levels. You should always refer to the specifications and relevant Health and Safety guide.
10.DUST EXTRACTION
If your tool is fitted with a dust extraction fitting, always ensure that it is connected and being used with a dust extractor.Vacuum cleaners can be used if suitable for the material being extracted.
11.PROTECT YOURSELF FROM ELECTRIC SHOCK When working with power tools, avoid contact with any earthed items (e.g. pipes, radiators, hobs and refrigerators, etc.). If you are using a power tool in extreme conditions (e.g. high humidity or generating metal dust), always use an RCD (residual current device) at the power socket.
12.STAY ALERT
Always watch what you are doing and use common sense. Do not operate a power tool when you are tired or under the influence of alcohol or drugs.
13.WHEN WORKING OUT OF DOORS
Only use extension leads designed for that purpose.
14.ACCESS TO MAINS SOCKET
If a stationary machine is fitted with a moulded plug and cable, the machine should not be positioned so that access to the mains socket is restricted.
15.DISCONNECT POWER TO THE TOOL
When not in use, before servicing and when changing accessories such as cutters, etc.
16.AVOID ACCIDENTAL STARTING
Make sure the switch is in the OFF position before plugging the machine into the power supply.
17.NEVER LEAVE MACHINE RUNNING UNATTENDED Turn power off. Do not leave machine until it comes to a complete stop.
18.DO NOT ABUSE THE CORD
Never carry the tool by the power cable or pull it from the socket. Keep the power cable away from heat, oil and sharp edges.
19.NEVER STAND ON TOOL
Serious injury could occur if the tool is tipped or if the cutting tool is accidentally contacted. Do not store materials above or near the tool, so that it is necessary to stand on the tool to reach them.
20.CHECK DAMAGED PARTS
Check for damage to parts, breakage of parts, mountings and any other conditions that may affect its operation.
A guard or other part that is damaged should be properly repaired or replaced.
21.KEEP GUARDS IN PLACE And in working order.
22.MAINTAIN TOOLS WITH CARE
Keep tools sharp and clean for the best and safest performance. Follow instructions for lubricating and changing accessories. All extension cables must be checked at regular intervals and replaced if damaged. Always keep the hand grips on the tool clean, dry and free of oil and grease.
23.USE RECOMMENDED ACCESSORIES Consult the owners manual for recommended accessories. Follow the instructions that accompany the accessories. The use of improper accessories may cause hazards.
24.REMOVE ADJUSTING KEYS AND WRENCHES
Form a habit of checking to see that keys and adjusting wrenches are removed from the tool before turning it on.
25.SECURE WORK
Use clamps or a vice to hold work. This frees both hands to operate the tool.
26.DO NOT OVERREACH
Keep proper footing and balance at all times.
27.USE RIGHT TOOL
Do not force the tool or attachment to do a job for which it was not designed.
28.DO NOT FORCE TOOL
It will do the job better and safer at the rate for which it was designed.
29.DIRECTION OF FEED
Feed work into a blade or cutter against the direction of rotation of the blade or cutter only.
30.WHEN DRILLING OR SCREWING INTO WALLS Always make sure there is no danger of hitting any hidden power cables, water or gas pipes in the wall.
IMPORTANT NOTE
Residual Risk. Although the safety instructions and operating manuals for our tools contain extensive instructions on safe working with power tools, every power tool involves a certain residual risk which can not be completely excluded by safety mechanisms. Power tools must therefore always be operated with caution !
- 4 -
