Draper manual Cinefold Portable Projection Screen by Draper, Assembly Instructions

Handy Crank

Standard T-Leg

Anti-sway stabilizers optional with HD legs

Assembly Instructions

Cinefold Portable Projection Screen by Draper

Caution

➀Read instructions through completely before proceeding; retain for future

reference.

➁Handle viewing surface with care; do not allow it to come in contact with sharp or dirty objects.

➂Use Handy Cranks provided; failure to do so may lead to screen damage.

➃ Make sure screen is level.

➄ Do not write on viewing surface.

Frame/Screen Assembly

➀Open carrying case and remove pouch containing screen surface, and three aluminum assemblies. The largest package is the frame. Unwrap and unfold it completely in

one direction only, locking all hinges. Frame should lie with snaps facing up.

➁Remove surface from its envelope. With male snaps at bot- tom, snap surface to frame. For easier surface attachment, start in one corner, then work your way around the frame.

Make sure snaps are secure.

Please note: For steps 3-5, screen should remain on floor or table, with surface facing up. Carefully lift screen from floor or table to complete each step.

➂Lock corner braces.

➃Unfold leg assemblies and lock hinges. Check that ad- justment knob is in the hole desired (upper for vertical screen position, lower for keystone elimination). DO NOT unfold feet at this time.

➄Attach legs to back side of vertical frame sections, as indi- cated by the color coded markings, using Handy Cranks. For standard screen height, match colored tapes exactly. Height is adjustable in 6" increments.

➅Raise Cinefold to a vertical position and unfold feet. Tighten adjustment knobs to maintain legs at desired angle. If your screen includes Heavy- Duty Legs, unfold and lock the extensions on the backs of the feet, hinge

up to the backs of the leg, and attach with Handy Crank.

➆If Anti-Sway stabilizers are supplied with your screen, refer to illustration and attach with Handy Cranks.

Frame	Hinges and
	hinge locks

Viewing

Surface

2" Min.

44" Max.

KE Adjustment

Knob

Caution: Make sure all hinges and joints are locked before raising screen to standing position.

Caution: Make sure screen is placed on level surface.

Caution: Beware of pinch points.

A Note About Surfaces

➀Always fold with snaps face-to-face. Do not permit screen fabric to contact border material or snaps when folded. Store in pouch provided.

➁Take care at all times not to permit Cinefold viewing surface

to contact any dusty or dirty area, nor any varnished or painted object.

➂When necessary, clean Cinefold viewing surface with mild soap and water. USE NO SOLVENTS! Surface must be com- pletely dry before folding.

Snaps

Frame

Handy Crank	Viewing
	Surface

Bottom row of snap studs to accept skirt

®

Standard T-Leg

Heavy duty legs optional

Copyright © 2007 Draper Inc. Form Cinefold_Inst07 Printed in U.S.A.