Draytek 2800 2. Quick Install Your Vigor2800 Series Router

2. Quick Install Your Vigor2800 Series Router

Before starting to configure the router, you have to connect your devices

correctly.

1. Connect the DSL interface to the external ADSL splitter with an ADSL line

cable.

2. Connect one port of 4-port switch to your computer with a RJ-45 cable.

3. For G models, connect detachable antennas to the router.

4. Connect the attached power adapter to the power port.

5. Check the ACT and WAN, LAN LEDs to assure network connections.

(Regarding the detailed LED status explanation, please refer to section 1.3)

Contents

Main Vigor2800 Series Quick Start Guide Copyright Information Safety Instructions and Approval Page European Community Declarations Regulatory Information Federal Communication Commission Interference Statement Table of Contents 1. Introduction 1.1 Brief Overview 1.2 Specifications For Vigor2800 G models For Vigor2800 i models All models Virtual TA Page 1.3 Front Panel LEDs and Rear Panel Interfaces Page Page Page 1.4 Package Contains 2. Quick Install Your Vigor2800 Series Router 2.1 Hardware Installation Page Step 3. Step 4 Step 6 3. Wireless LAN Settings(for G models) Wireless Distribution System 3.1 General Settings 3.2 Security 2. WPA: If you select WPA in Mode, then select the Type of WPA here. 3. WEP: 3.3 WDS Settings Click WDS Settings to configure the WDS functions. Page 4. Trouble Shooting