For MPoA Users

1.Check if the Enable option is selected.

2.Check if DSL Modem Settings is set appropriately.

3.Check if IP Address, Subnet Mask and Gateway are set correctly (must identify with the values from your ISP) if you choose Specify an IP address.

4.5Backing to Factory Default Setting If Necessary

Sometimes, a wrong connection can be improved by returning to the default settings. Try to reset the router by software or hardware.

Warning: After pressing factory default setting, you will loose all settings you did before. Make sure you have recorded all useful settings before you pressing. The password of factory default is null.

Software Reset

You can reset the router to factory default via Web page.

Go to System Maintenance and choose Reboot System on the web page. The following screen will appear. Choose Using factory default configuration and click OK. After few seconds, the router will return all the settings to the factory settings.

35

Page 39
Image 39
Draytek 2820 Series quick start Backing to Factory Default Setting If Necessary, For MPoA Users, Software Reset