AE/LZB 119 1902 R1A
Error Name | Message | Code | Description |
PIFEAT_SNR_ERROR | FEAT ERR | 550 | Feature encryption - Cannot read radio ROM serial |
|
|
| number. |
PIFEAT_READ_ERROR | FEAT ERR | 551 | Personality feature encryption read failure or data not |
|
|
| available. |
PIFEAT_CRC_ERROR | FEAT ERR | 552 | decryption failure. Personality feature encryption CRC |
|
|
| failure. |
RI_DSPDOWN_NOATTEMPT | DSP ERR | 850 | DSP not found. |
RI_DSPDOWN_NOTFOUND | DSP ERR | 851 | DSP file not found. |
RI_DSPDOWN_CRCFAIL | DSP ERR | 852 | DSP file is corrupted. |
RI_DSPDOWN_ENCERR | DSP ERR | 853 | Radio feature encryption does not match DSP file. |
RI_DSPDOWN_PMFAIL | DSP ERR | 854 | DSP file is corrupted or hardware failure. Reprogram |
|
|
| radio or power cycle the radio. |
RI_DSPDOWN_DMFAIL | DSP ERR | 855 | DSP file is corrupted or hardware failure. Reprogram |
|
|
| radio or power cycle the radio. |
RI_DSPDOWN_BIOSERR | DSP ERR | 856 | Hardware failure. |
AEGIS_KEYLOAD_NOBANKS | NO KBANK | 860 | Attempt to keyload radio w/o bank storage. |
AEGIS_PVT_NONE | NO PVT | 870 | Attempt to keyload radio w/o private DSP file. |
Radio Programming Errors
Programming errors are divided into three categories.
Protocol Errors Produced By The Low Level Communication Routines
| Message | Code |
| Description | ||
| Successful | 0 |
| Command was performed successfully. | ||
| Protocol- Canceled by receiver | 5 |
| x328 protocol received a cancel, The radio detected a cancel | ||
|
|
|
|
| command. | |
| Protocol- Canceled by sender | 6 |
| x328 protocol transmitted cancel. The radio is canceling the read | ||
|
|
|
|
| command. | |
| Protocol- Terminate transmission | 7 |
| x328 protocol received an end of transmission. | ||
| Protocol- Transmit error | 8 |
| x328 protocol could not transmit. Reliable communication can not be | ||
|
|
|
|
| established. It could be radio or PC hardware problems | |
|
|
|
|
| (programming cable, interface box or radio hardware). | |
| Protocol- Protocol initialization error | 9 |
| x328 protocol not initialized or failed to initialize. | ||
Radio Errors That Are Returned From The Bootloader Software | ||||||
|
|
|
|
|
| |
| Message |
| Code |
| Description | |
| Radio- Programmed successfully |
| 10 |
|
| Radio responded with a success. Radio acknowledged successful |
|
|
|
|
|
| programming. |
| Radio- Comport configuration failed |
| 11 |
|
| Radio could not configure its comport (hardware failure). |
| Radio- Flash erase failed |
| 12 |
|
| Radio failed to erase the flash memory. The radio flash memory |
|
|
|
|
|
| part is unusable or it can not detect the 12 volts power, Check the |
|
|
|
|
|
| programming box and cables. |
| Radio- Flash write failed |
| 13 |
|
| Radio failed in writing to the flash memory. Retry the programming |
|
|
|
|
|
| process (hardware failure). |
| Radio- Flash code CRC did not match |
| 14 |
|
| Flash code not programmed correctly, CRC did not match, the |
|
|
|
|
|
| operating software will not execute. |
26
