AE/LZB 119 1902 R1A
FATAL_LCD_NOACK | HARDWARE | 40 | LCD did not ack message. |
FATAL_LCD_HARD_FAIL | HARDWARE | 41 | LCD hardware is invalid. |
FATAL_SCI_NOHEAP | HARDWARE | 50 | Serial communication interface out of heap (RAM |
|
|
| memory) space. |
FATAL_DSP_NOACK | HARDWARE | 60 | DSP did not ack message. |
FATAL_DSP_FIFOOVR | HARDWARE | 61 | DSP RX FIFO overflow. |
FATAL_DSP_BADMSG | HARDWARE | 62 | Unknown message received from DSP. |
FATAL_DSP_WRONGRESP | HARDWARE | 63 | Unexpected response received from DSP. |
FATAL_DSP_TWOACKS | HARDWARE | 64 | |
FATAL_DSP_NORESOURCE | HARDWARE | 65 | DSP queue is full. |
FATAL_BL_NOHEAP | HARDWARE | 91 | Software memory error - Boot loader. |
FATAL_BL_SCI_ATTACH | HARDWARE | 92 | Boot loader could not attach to SCI. |
FATAL_RXSIF | HARDWARE | 98 | Phase samples are not changing. |
Operational Software Fatal System Errors
Software fatal errors will automatically reset the radio. When the radio reset does not correct the problem, the radio must be serviced. Some of the errors listed below contain additional information to help resolve the problem.
Error Name | Message | Code | Description |
RADC_PITD_ERROR | TRACKING | 200 | Personality tracking data error. Reprogram the |
|
|
| tracking data. |
RADC_PIHW_ERROR | PERSDATA | 201 | Personality hardware data error. Reprogram |
|
|
| the personality. |
RADC_FREQ_ERROR | FREQDATA | 202 | Personality frequency data error. Reprogram |
|
|
| the personality. |
RADC_PITD_MALLOC_ERROR | SOFTWARE | 203 | Personality tracking data malloc error. |
|
|
| Reprogram the tracking data. |
RADC_PITD_CKSUM_ERROR | SOFTWARE | 204 | Personality tracking data checksum error. |
|
|
| Reprogram the tracking data. |
DACS_MODEM_FATAL_ERROR | SOFTWARE | 301 | Unable to correctly configure the modem for |
|
|
| EDACS operation. Reprogram the |
|
|
| personality. |
DACS_RADC_FAILURE | SOFTWARE | 302 | Power cycle the radio. |
DACS_TU_PUT_CISYSMSG_ERROR | SOFTWARE | 303 | CI message buffer is not enabled. |
CONV_RADC_ERROR | SOFTWARE | 400 | Error calling RADC function. Power cycle the |
|
|
| radio. |
CONV_PUT_UIMSG_ERROR | SOFTWARE | 402 | UI message buffer not enabled. Power cycle |
|
|
| the radio. |
CONV_MODEM_RXOVR | SOFTWARE | 403 | Conventional DIGV modem overflow. |
CONV_MODEM_RXAVR | SOFTWARE | 404 | Conventional DIGV modem underflow. |
CONV_MODEM_FATAL_ERROR | SOFTWARE | 405 | Unable to correctly configure the modem for |
|
|
| conventional DIGV operation |
CONV_PERS_ERROR | PERSDATA | 407 | Conventional personality error. |
PI_NOPERS_ERROR | PERSDATA | 500 | Personality data is not present. Program the |
|
|
| personality. |
PI_CRC_ERROR | PERSDATA | 501 | Flash personality CRC did not match |
|
|
| EEPROM. Reprogram the personality. |
PI_DESC_CRC_ERROR | PERSDATA | 502 | Crucial personality data has incorrect CRC. |
|
|
| Reprogram the personality. |
24
