DM 2610925497
Remember, your new Dremel Cordless Rotary Tool is the finest power tool of its kind. But its perfor- mance is only as good as the accessories with which it is used. We recommend only Dremel
accessories be used. Use of any other accessories may create a hazard. We hope you’ll enjoy many years of trouble free pleasure from your Dremel Cordless Rotary Tool.
Inserting batteries
1.Remove the battery pack from the tool by squeez- ing the two tabs on the battery pack together and slide the battery pack out of the tool.
BATTERY PACK
RELEASE TAB
BATTERY PACK COVER 
2. Remove battery pack cover |
| ||
from the battery holder by |
| ||
squeezing the two tabs marked | PRESS | ||
PRESS and remove the battery | |||
| |||
cover from the battery holder. |
| ||
BATTERY HOLDER | BATTERY PACK COVER | ||
|
| RELEASE TABS | |
3.Paying special attention to the orientation of the batteries, insert four AA batteries into the battery holder. Note both diagrams on the battery holder
showing correct battery direction.
4.Align notch in battery pack cover with arrow in the battery holder and press together press together. The two parts will only fit together when the arrow and notch are aligned. The two parts will join together with a click.
BATTERY
PACK
COVER
BATTERY
HOLDER
5.Insert the battery pack into the tool by aligning the arrow in the pack with the arrow on the tool. The two parts will only fit together when the two arrows align. The two parts will join together with a click.
ALIGNMENT
MARKS
!WARNING RISK OF FIRE USE ONLY 1.5V ALKALINE BATTERIES ONLY.
!WARNING Do not install backwards, charge or put in fire. Batteries
may explode or leak.
Page 10
