6. Service
This feature will lit during mechanical failure situation. User can notify the technician for repair.
3. INSTALLATION Unpacking the box to inspect for any damage, which may have occurred during shipment. If there
are any damages, please contact your dealer immediately.
3.1 PUMP & MATTRESS INSTALLATION
1. Place the mattress or pad on top of the bed frame.
Please note for the foot end.
It is recommended to use this mattress system
with a bed frame with adequate side rails to
prevent falling.
2. Hang the pump onto bed rail (foot-end), and adjust
hangers to best upright position of the pump, or
place the pump on a flat surface.
3. Connect air hose connectors from air mattress to the
pump unit. When a "click" sound is felt or heard, the
connection is completed and secured.
NOTE: Check and ensure the air hoses are not
kinked or tucked under mattress.
7
4. Plug the power cord into electrical outlet.
NOTE: 1. Make sure the pump unit is suitable
for the local power voltage.
2. The plug is also served to disconnect
the device.
NOTE:1. S’assure que la pompe est compatible
au voltage local ou disponible.
2. L’appareil est également muni d’une
fiehe de connexion à l’électricité.
CAUTION: The pump can only be applied to
the mattress recommended by the
manufacturer. Do not use it for any
other purpose. (applied part: air
mattress)
AVERTISSEMENT : La pompe ne peut être
utilisée qu’avec le
matelas designé ou r
recommandé par le
manufactureier,. Ne pas
server d’ysage autre que
celui auquel elle a été
conçu
5. Then turn the main power switch to ON position.
Grounding:
Before any connection to the output connectors is made, the unit shall be connected to a protective
earth conductor via the three-core main cable; the mains plug shall be inserted only into a socket outlet
provided with a protective earth contact. The protective action shall not be negated by the user of an
extension cord without protective conductor.
Several installation tips are listed below:
After installation, the extra length of the power cord, if any, should be nea tly arranged to avoid any
tripping accidents. The EQUIPMENT should be firmly placed at position where users/doctors can
access easily.
8