Drolet 1200, 2000, 1600 owner manual Assembly, Pedestal and Decorative Sidewall Installation

ASSEMBLY

PEDESTAL AND DECORATIVE SIDEWALL INSTALLATION

Pedestal Installation :
1.	Remove all bricks and insulations in
	the appliance.
2.	Slowly, lay down the stove on his
	back.
3.	Install legs or the pedestal with the
	supplied nuts and bolts. Stand up
	the stove and place it with the
	required clearances.	Note that
	there is eight holes in the bottom of
	the stove but only four will align with
	the pedestal.
4.	Slide the front part of the pedestal
	base around the pedestal and fix
	the rear part with the two supplied
	screws.
5.	Slide the ash pan in position (for
Figure 1: SIBERIAN-1200 and 1600	Deluxe model only).
Side Panels Installation :
1.	Fix the front part of the decorative
	side with two screws supplied. The
	oblong holes allow to adjust the
	height of the side 3\16" (5 mm)
	above the top of the stove.
2.	Then, fix the back on the decorative
	side with three screws and washers
	supplied. Line up the decorative
	side in relation to the side of the
	appliance.

Figure 2: SIBERIAN-2000

4