Ignition (cont’d):

Before igniting the paper and kindling wood, it is recommended that you warm up the chimney. This is done in order to avoid back draft problems; cold air from the outside tends to penetrate into the chimney. Twist together a few sheets of newspaper into a torch. Light up this paper torch and hold it as close as possible to the entry of the flue inside the combustion chamber to warm up the chimney. Once the updraft movement is initiated, you are ready to ignite the stove by lighting the paper and kindling wood inside the combustion chamber.

Leave the door slightly opened (a few inches) for a 5 to 10 minute period, under supervision, in order to allow for good combustion. After this time, you may close the door and progressively adjust the air control to obtain the desired intensity.

CAUTION:

-Do not leave the stove unattended when the door is slightly opened.

-When the stove is used for the first time, intense fire is prohibited in order to allow adequate curing of the paint covering the stove and to prevent a "thermal shock" which may remove or whiten the paint.

-Make sure the area where the stove is located is well ventilated, to remove the bad odors emitted from the paint, during the first, two or three hours of using the stove and for the first three or four fire start-ups.

-Never heat the stove outside before installation: it is then impossible to adequately monitor the combustion intensity, which can provoke overheating and a thermal shock to the paint.

-Never use fluid or chemical products to ignite the fire.

-Do not burn waste, flammable fluids such as gasoline, naphtha or motor oil.

Heating:

Once you have obtained a good bed of embers you should reload the unit. For optimal and safe operation, we recommend that you operate the stove with a wood load not higher than 6 inches.

The combustion air intake control is located on the door. We strongly recommend that you install a magnetic thermometer on your smoke exhaust pipe, approximately 18" (457 mm) above the stove. This thermometer will indicate the temperature of your gas exhaust fumes within the smoke exhaust system. The ideal temperature of the flue is between 250°F and 475°F.

Page 6 of 8

Page 7
Image 7
Drolet Hunter Wood Stove owner manual Ignition cont’d, Heating

Hunter Wood Stove specifications

The Drolet Hunter Wood Stove is a remarkable heating solution designed for efficiency, durability, and style. It stands out in the market for its blend of traditional wood-burning stove aesthetics and modern technologies, making it an ideal choice for homeowners seeking warmth during the cold months while maintaining an eco-friendly approach.

One of the main features of the Drolet Hunter Wood Stove is its impressive heat output. It can produce up to 75,000 BTUs, effectively heating areas up to 2,000 square feet. This powerful heating capability makes it perfect for both large living spaces and open-concept layouts. The stove's significant firebox can accommodate logs up to 20 inches long, allowing for longer burn times and fewer reloads throughout the day.

Constructed from high-quality steel, the Drolet Hunter is built to last. Its robust design not only provides durability but also enhances the overall aesthetic appeal of any room. The stove’s sleek, modern lines complement traditional decor while providing a contemporary touch. Additionally, it comes with a large ceramic glass door that offers a beautiful view of the fire, creating a cozy ambiance.

The wood stove is equipped with advanced technologies that maximize its efficiency and environmental performance. One such feature is its secondary combustion system, which helps to maximize fuel efficiency and minimize emissions. By promoting a cleaner burn, this technology reduces the amount of smoke and particulate matter released into the atmosphere, making it an environmentally friendly option.

Another characteristic of the Drolet Hunter Wood Stove is its easy-to-use air control system. This system allows users to adjust the airflow to the fire, enabling them to control the intensity of the heat output. With precise airflow management, users can achieve longer burn times and maintain a consistent temperature throughout their space.

With its combination of efficiency, design, and environmentally friendly features, the Drolet Hunter Wood Stove emphasizes functional heating without compromising style. Whether you are looking to supplement your home's heating system or create a focal point in your living space, this wood stove is a powerful and visually appealing choice.