Dual DP295 manual Special Functions, Sleep timer setting, Special VCD / Svcd features

Special Functions

Sleep timer setting

The sleep timer enables the system to switch to standby mode automatically at a preset time .

1Press SLEEP repeatedly to select a preset time. - The selections are as follows (time in minutes)

15 30 45 60 90 120 OFF 15...

2When you reach the desired length of time, stop pressing the SLEEP button.

3To check the remaining length of time after sleep timer is activated.

Press SLEEP once.

4To change the preset sleep timer

Press SLEEP again while the remaining sleep timer is shown.

-The display will show the next sleep timer options.

5To deactivate the sleep timer

Press SLEEP repeatedly until “ OFF” is displayed, or press the POWER button.

Special VCD / SVCD features

Playback Control (PBC)

PBC playback allows you to play Video CDs interac- tively, following the menu on the TV screen.

-Press VCD/PBC key to select PBC ON or PBC OFF.

When playing a disc with PBC function

1 If “ PBC OFF ” , press / the system will start playback automatically.

2If “ PBC ON ” , the PBC menu (if available) will ap- pear on the TV screen for selection. Use the num- ber keypad (0~9) to enter your choice

Note

If PBC mode is switch on, TIME SEARCH and RE- PEAT functions are not available.

Activating progressive scan mode

The progressive-scan display presents 60 complete frames per second, rather than the 30 frames per second of interlaced scanning (ordinary normal TV system). With nearly double the numbers of line, progressive scan offers higher picture resolution and eliminates bothersome motion artifacts those jagged edges on moving objects.

To enjoy the full quality potential offered by progressive scan feature, a progressive scan TV is required.

1In the STOP mode, press P-SCAN button and OK button can to switch between the PROGRESSIVE or INTERLACE.

2All this action must complete in 5 seconds dura- tion.

3If witch success, the relevant message will display on the TV screen.

Note

You need to switch the system off before change the progressive scan mode.

Special MP3 features

MP3 meun

1Press MENU to switch on the MP3-CD menu. The menu appears on the TV screen.

2To select a desired album, press / / / and

followed by OK or to confirm. The title menu appears on the TV screen.

3To select a desired title, press / / / and fol-

lowed by OK or to start playback.

4You can also use the number keys (0~9) to enter your choice.

If the MP3-CD menu is switched off

The system will start playback automatically.

16