
Operations
General setup
1Press SETUP to enter SETUP MENU.
2 Use / / / to select your preferred option.
3Press OK to confirm a highlighted selection.
4To exit setup menu, press SETUP.
Setting the Picture
16:9
(Wides creen)
4:3 LB (Letter Box)
4:3 PS (Pan Scan)
TVSHAPE | 4:3PS |
VIDEOOUT | AUTO |
TVSHAPE |
|
SCR SAVER | OFF |
GO TO PICTURE SETUP PAGE
*TV Shape
Select the aspect ratio of the TV to be connected.
4:3 PS (default setting)
-If you have a conventional TV set and your DVD is not formatted for widescreen viewing, use this set- ting. A wide picture is displayed on the whole TV screen with a portion automatically cut off.
4:3 LB
-If you have a conventional TV set and your DVD is formatted for widescreen viewing, use this setting. wide bands will be is displayed on the upper and whole portions of the TV screen.
16:9
-If you have a widescreen TV set, use this setting (you must also set your widescreen TV to “ full size” ).
Note
If your DVD is not encoded to allow you to change the aspect ratio, TV shape cannot be changed.
*TV System
Allows you to select the colour system matching the connected TV set.
AUTO
-If the connected TV is multi system, select this mode. The output format will be in accordance with the video signal of the disc.
NTSC (defaut setting )
-If the connected TV is NTSC system, select this mode. It will change the video signal of a PAL disc and output in NTSC format.
PAL
-If the connected TV is PAL system, select this mode. It will change the video signal of a NTSC disc and output in PAL format.
*Video Out
Video out selection enables you to choose the type of video output suitable for your receiver.
-Select
PR PB Y
-Select PR PB Y , if you have connected the video output to your TV using the component Video out (Pr/Cr Pb/Cb Y) jacks.
10