Dual LU63PB/PW owner manual Connecting Speakers, LU63PB-LU63PW CONNECTION

®

LU63PB-LU63PW CONNECTION

Connecting Speakers

Connecting Your Speakers

LU63PB

Speaker Wire -We recommend the use of two conductor 18-gauge speaker wire to connect the speakers to your receiver. When connecting the speakers in a stereo configuration, the wire length should be similar. One length should not be dramatically longer or shorter then the other. Maintaining similar wire lengths will provide superior sound quality.

Polarity - Speaker wire polarity is indicated by either a color stripe on the insulation, ridges molded into one side of the insulation, the color of the insulation case around the wire, or by the color of the wire itself (copper or silver).

Connect speaker wire using the positive (+) terminal on the receiver to the positive (+) speaker terminal, and the negative (-) terminal on the receiver to the negative (-) speaker terminal. All speakers in a system must be connected with the same relative polarity.

Connection - It is recommended that the speaker wire insulation be stripped back approximately 3/8”, allowing the wire conductor to make a proper connection. The gold terminals have red (positive) and black (negative) polarity indicators. Loosen the gold terminals by turning counter- clockwise. Insert the wire end and re-tighten.

Banana style connectors may also be used. The connection is made by connecting the speaker wire to the banana plugs, and then inserting the banana plug into the top portion of the binding posts.

Note: Do not allow the positive and negative speaker wire from the receiver to make contact at any time, as this will cause a short.

5