| XDMA6438 OPERATION | ||
|
|
| |
| Troubleshooting | ||
|
|
| |
Problem | Cause | Action | |
| Yellow wire not connected or incorrect | Check connections for proper | |
Unit will not turn on | voltage Red wire not connected or | ||
voltage (11~16VDC) | |||
incorrect voltage | |||
(no power) |
| ||
Black wire not connected | Check connection to ground | ||
| |||
| Fuse blown | Replace fuse | |
| Speaker wires not connected | Check connections at speakers | |
Unit has power | One or more speaker wires touching | Insulate all bare speaker wires | |
(but no sound) | from each other and chassis | ||
| each other or touching chassis ground | ground | |
|
| ||
| Yellow or red wire touching chassis | Check for pinched wire | |
| ground | ||
Unit blows fuses |
| ||
Speaker wires touching chassis ground | Check for pinched wire | ||
| |||
| Incorrect fuse rating | Use fuse with correct rating | |
| Unit is not mounted correctly or | Check mounting sleeve and | |
Excessive skipping | backstrap is not secure | backstrap support | |
Physical defect in media (CD, | Check media for scratches | ||
| |||
| |||
|
| ||
ERROR 2 appears | Disc read error or disc is in upside | Press eject or RESET | |
on display | down | ||
| |||
PROTECT appears | The WMA file is | Write disc using WMA files that | |
on display | (Digital Rights Management) | are not | |
NO FILE appears | Selected file is not available in direct or | Repeat search using valid | |
on display | alphanumeric search modes | parameters | |
| CD mechanism position out of | Press and hold EJECT | |
| for 3 seconds to reset CD | ||
Unit will not accept | alignment | ||
mechanism position | |||
| |||
a disc |
|
| |
CD transit screws still in place | Remove 2 transit screws | ||
| |||
| located on top of the unit | ||
|
| ||
|
|
| |
| An invalid ID3 tag version is present | Version 1.0 to 2.4 ID3 tags are | |
NO SUPPORT appears | supported. | ||
| |||
on display | An ID3 tag character is not supported | Only ASCII characters are | |
| |||
| supported. | ||
|
| ||
|
|
|
23