Panasonic KX-TD1232C Troubleshooting, If a power failure should occur, Power Failure Transfer

APPENDIX

6.1.4Troubleshooting

If a power failure should occur...

Your System enables conversations between specific outside lines and extensions (Power Failure Transfer), and supports system data backup.

Power Failure Transfer

Specific extensions are automatically connected straight to specific outside lines. This provides outside line conversations between the pre-assigned extensions and outside lines:

<KX-TD816>

Outside line 01 is connected to extension jack number 01.

Outside line 02 is connected to extension jack number 02.

Outside line 05 is connected to extension jack number 09.

Outside line 06 is connected to extension jack number 10.

<KX-TD1232>

Outside line 01 is connected to extension jack number 01.

Outside line 02 is connected to extension jack number 02.

Outside line 03 is connected to extension jack number 09.

Outside line 04 is connected to extension jack number 10.

Outside line 09 is connected to extension jack number 17.

Outside line 10 is connected to extension jack number 18.

•All other conversations are disconnected during a power failure.

•Digital proprietary telephones (DPTs) cannot be used during a power failure. SLTs can work in the event of a power failure.

•When power is restored after a power failure, your system automatically restarts operation, maintaining as much of the previous system data as possible.

Problem	Probable Cause	Possible Solution
Nothing is heard in the hands-	The "Headset" mode is	When the headset is not used, set
free mode.	selected.	the mode to "Handset."
		Refer to "Handset/Headset
		Selection" in Station
		Programming (Section 2), or
		"Initial Setting" (Section 1).
The unit does not ring.	• The outside number is not	• For programming outside
	programmed.	numbers, refer to the
	• The Ringer Volume is set	Installation Manual.
	to "OFF".	• Increase the Ringer Volume.
		Refer to "Initial Setting"
		(Section 1).

User Manual 377