Panasonic KX-TD1232C General Programming Instructions, Default Setting, Required Telephone Set

User Programming

3.1User Programming Instructions

3.1.1General Programming Instructions

User Programming allows you, any extension user who knows the User Programming Password, to program the following system features from your telephone individually.

•[000] Date and Time Set

•[001] System Speed Dialing Number Set

•[002] System Speed Dialing Name Set

•[003] Extension Number Set

•[004] Extension Name Set

•[005] Flexible CO Button Assignment

•[006] Operator / Manager Extension Assignment

•[007] DSS Console Port and Paired Telephone Assignment

•[008] Absent Messages

•[009] Quick Dial Number Set

•[012] ISDN Extension Number Set

•[013] ISDN Extension Name Set

•[014] VM Name Set

•[017] DISA User Codes

To program, you need to switch your telephone to the User Programming mode.

During the programming mode, your telephone is in a busy condition for outside callers. If you want to make a normal call operation, you must finish the programming mode.

Default Setting

This system has default factory settings. Any required changes can be written in the "Programming Tables."

Required Telephone Set

One of the following Proprietary Telephone (PT) sets with display is required for User Programming:

•Digital Proprietary Telephone (DPTs): KX-T7436, KX-T7433, KX-T7431, KX-T7235, KX-T7230.

Soft Buttons and SHIFT Button on the Display PT

Three soft buttons are provided just below the display of the following Digital Proprietary Telephones (DPTs): KX-T7230, KX-T7235, KX-T7433, KX-T7436.

Functions of these Soft buttons vary as the programming procedures advance step by step. Those functions that are currently assigned to the buttons are shown on the lower line of the display. If the SHIFT button indicator is on, two functions are available for each Soft button. To alternate between the two functions, press the SHIFT button on the right side of the display.

70 User Manual