Panasonic KX-TD1232C user manual Initial Setting for KX-T7200 Series

DPT Overview

1.1.6Initial Setting for KX-T7200 Series

Display Contrast Adjustment (KX-T7230 and KX-T7235 only)

A Soft button and the VOLUME Control button are used to adjust the display contrast. The contrast level is indicated on the display by the number of asterisks. You can adjust the contrast level under the following conditions:

a)When on-hook, or

b)During an outside/intercom call.

7230 / 7235

CONT

S 1 S 2 S 3

VOLUME

Press CONT (S1). Press VOLUME (UP /DOWN ) Control button.

<PT Display Example>

Contrast:***

(-contrast level 3)

When using the headset

The Panasonic Digital Super Hybrid System supports the use of a headset with a proprietary telephone (PT). When you use the headset (optional), you should switch the selection mode first. Selection is explained in the "Handset / Headset Selection" in Station selection mode first. Selection is explained in the "Handset / Headset Selection" in Station Programming.

To change to the headset mode

Press: [PROGRAM] [9] [9] [9] [2] [STORE] [PROGRAM].

Changing the ringing tone of a CO button / Intercom calls

There are eight ringer frequencies available for each CO (Group-CO, Loop-CO, Single-CO) button and INTERCOM button. If you wish to change them, refer to "Ringing Tone Selection for CO Buttons" or "Ringing Tone Selection for Intercom Calls" in Station Programming.

Volume Control — Handset Receiver/Headset/Ringer/Speaker

Allows you to adjust the following volumes as necessary:

—Handset Receiver volume (level 1 through 3)

—Headset volume (level 1 through 3)

—Ringer volume (level 0 through 3)

—Speaker volume (level 1 through 12)

User Manual 39