Panasonic KX-TD1232C user manual 167, Re-try, Disa User Code Entry Failure

Station Features and Operation (DPT/SLT)

Re-try

From Outside Telephone

It is possible (by System Programming) to dial a different number during a conversation with an outside party or while hearing a ringback, reorder, or busy tone.

desired no.

Press . Dial the desired number.

•You hear a dial tone.

•If you dial " "while hearing a DISA outgoing message, dial tone, or after the DISA outgoing message, the call will be disconnected.

•You must dial a line access code (9 or 81 through 88) when calling an outside party.

Conditions

Calling an extension

•You can choose Non Security or All Security mode. In All Security mode, the caller must enter a pre-assigned DISA user code to make intercom calls.

•If the DISA call is not answered within a specified period of time, the system redirects it to the pre-determined IRNA destination.

If IRNA destination is not programmed, the DISA call continues to ring at the first destination extension.

Calling an outgoing outside line

•You can choose Non Security, Outside Line Security or All Security mode. In Outside Line Security mode, the caller must enter a pre-assigned DISA user code to make outside calls. In All Security mode, the caller must enter a pre-assigned DISA user code to make both outside and intercom calls.

General

•If the caller does not dial any digits during and after the playback of DISA outgoing message, the system will direct him or her to the pre-determined destination (Intercept Routing). "Intercept Routing" is activated 5 seconds after (default) or immediately after the playback depending on System Programming.

•DISA User Code

You can store up to 32 programmable DISA user codes. These codes can have four to ten digits, and they must be unique. You can assign a "Class of Service" number to each code. The "Class of Service" appended to the code denies the "Toll Restriction".

•DISA User Code Entry Failure

If the DISA caller fails to enter the valid DISA user code three times consecutively, the call will be disconnected.

•DISA built-in Automated Attendant Number

This system supports up to ten programmable DISA built-in auto attendant numbers. After listening to the DISA message, you can dial a single digit.

User Manual 167