Panasonic KX-TD1232C user manual Conditions

Station Programming

OR

1)Press 2 and then rotate the Jog Dial until "M"appears.

2)Press 2 and then rotate the Jog Dial until "i"appears.

3)Press 2 and then rotate the Jog Dial until "k"appears.

4)Press 2 and then rotate the Jog Dial until "e"appears.

Note

•Pressing the SHIFT button alternates between capital and lower case letters. Once this button is pressed, that letter SHIFT mode remains until SHIFT is pressed again.

•To erase the last word (to backspace), press the CONF button.

(The CONF button becomes the " "(backspace) key when using the overlay.)

•To erase all of the data, press the CLR (S2) button.

•If you keep rotating the Jog Dial, all of the characters will be displayed in order.

<Example> If you rotate the Jog Dial after pressing 2, all of the characters will appear in the following order:

A a B b ... Z z (space) ! ? . , ' : ; / + – = < > # $ % & @ ( ) A a B b ...

Conditions

•The default is "Not Stored".

•Up to 10 dialing numbers and names can be assigned. Each dialing number has a maximum of 16 digits and each name has a maximum of 10 characters.

User Manual 67