User Programming

Before entering the user programming mode

Before entering the user programming mode, confirm that:

Your telephone is on-hook, and

No calls are on hold at your telephone.

Entering the user programming mode

To enter the User Programming mode:

Press PROGRAM + + + User Programming Password (default:1234)

• The display shows the Initial Message: USR-PGM NO?

Note

If nothing is entered within five seconds after the PROGRAM button is pressed, programming mode is canceled.

During the programming mode, your extension is treated as a busy extension.

Only one proprietary telephone can be in programming mode at any one time.

The User Programming Password is not shown on the display for security reason. The password can be changed by System Programming.

Programming Guide References

[120] User Password

In this section, programs [001] through [004] are explained. Please consult with your dealer when you need to change the following programs:

[005] Flexible CO Button Assignment

[006] Operator / Manager Extension Assignment

[007] DSS Console Port and Paired Telephone Assignment

[008] Absent Messages

[009] Quick Dial Number Set

[012] ISDN Extension Number Set

[013] ISDN Extension Name Set

[014] VM Name Set

User Manual

73

Page 73
Image 73
Panasonic KX-TD1232C user manual Before entering the user programming mode, Entering the user programming mode