Panasonic KX-TD1232C Confirming the assigned function data, Tone1, Program access number

Station Programming

Confirming the assigned function data

— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].

PT

HOLD

program access number

Enter the program access number. Press HOLD (END).

The display shows the initial programming mode.

Enter the program access number* as follows.

-1:Preferred Line Assignment - Outgoing

-2:Preferred Line Assignment - Incoming

-3:Full One-Touch Dialing Assignment

-4:Intercom Alert Assignment

-5:Call Waiting Tone Type Assignment

-6:Self-Extension Number Confirmation

-7:Live Call Screening Mode Set†

-81:Initial Display Selection

-82:Bilingual Display Selection - 9:Handset/Headset Selection

-01:Remote Station Look Control (- Operator / Manager only)

-02:Call Log Lock Control, Incoming (- Operator / Manager only)

-03:Live Call Screening Password Control†(- Operator / Manager only) - #:Station Programming Data Default Set

The display shows the programmed data.

<PT Display Example>

When you press [5], the display shows:

C.W. Tone1

(- The Call Waiting tone is currently programmed to Tone 1.)

*A programming access number is required to program/confirm the function data by Station Programming.

†: Available when the Digital Super Hybrid System is connected to a Digital Proprietary Telephone capable Panasonic Voice Processing System (one that supports digital proprietary telephone integration; e.g., KX-TVS100)

—To exit the Station Programming mode: Press [PROGRAM] or lift the handset.

—If you wish to change the data, follow the programming procedure explained in this section.

48 User Manual