Panasonic KX-TD1232C user manual SPD Code?→, 000Not Stored, Speed dial no, Telephone no

User Programming

Programming

Display PT

0

0

Dial 001.

1

NEXT

	speed dial no.
Press NEXT.	Enter a speed dial number
	(000 through 499).

<PT Display>

001 SYS SPD DIAL

Repeat these steps

<PT Display>

SPD Code?→

To enter speed dial number 000, you can also press NEXT.

<PT Display Example>

000:Not Stored

STORE

telephone no.

Enter a telephone number. Press STORE.

To delete the current entry, press CLEAR. To change the current entry, press CLEAR and enter the new number.

<To continue:>		[When SELECT is pressed]
	NEXT	speed dial no.
		Enter the desired speed
	PREV
		dial number
	SELECT	(000 through 499).
Press NEXT or
PREV or SELECT.

<To end:>

END

Press END.

Conditions

• Each speed dial number has a maximum of 24 digits. The valid characters are 0 through 9,

, and # keys, and the FLASH, PAUSE, SECRET and "–"(hyphen) buttons.

— To store the flash signal, press FLASH.

Note: The Stored flash will only be effective during an established call.

— To store a hyphen, press the "–" button.

80 User Manual