Panasonic KX-TD1232C user manual 146, 101, RCL Ext

Station Features and Operation (DPT/SLT)

<PT>

•The destination extension shows the Caller ID and the extension number from where the call was transferred on the display.

<Example> The Caller ID number "123456789" is transferred from extension 101.

101 123456789

The priority of the display is:

Caller ID name > Caller ID number > Outside line name > Blank (if none of these is assigned).

If your telephone has a two, three or six line display, both the Caller ID name and number are displayed.

•You can change the display to show the original extension number and name by System Programming.

•A flexible CO button can be assigned as a DSS button.

•To use "One-Touch Transfer", System Programming is required.

•Pressing the FLASH button while dialing clears the display. Then you can enter the revised number.

•If you want to return to the held call, press the TRANSFER button or corresponding CO, INTERCOM button before the destination extension answers.

•When "Transfer Recall" occurs, the display shows: <Example>

RCL: Ext 103

<SLT>

•If you want to return to the held call, flash the hookswitch before the destination extension answers.

<ISDN Telephone>

• This feature is not available for ISDN telephones.

Programming Guide References

[108]Automatic Hold by CO / DSS Button

[201]Transfer Recall Time

[990]System Additional Information

User Manual References

2.2.2Flexible Button Assignment

4.3.84Uniform Call Distribution (UCD)

146 User Manual