Station Features and Operation (DPT/SLT)

Call Transfer using a DSS button

Allows PT users to perform Screened or Unscreened Call Transfer by using a DSS button. There are two operations, depending on whether or not One-Touch Transfer*1 is set.

When "One-Touch Transfer" mode is enabled:

PT

During a conversation;

(DSS)

Press DSS (flexible button).

The other party is placed on hold and the destination extension is called immediately.

When "One-Touch Transfer" mode is disabled:

PT

During a conversation;

TRANSFER(DSS)

Press TRANSFER.

Press DSS (flexible button).

Conditions

Automatic Disconnection

If there is no answer for 30 minutes after "Transfer Recall" starts, the line will be disconnected.

If the destination extension does not answer the call within twelve rings (default), "Transfer Recall" occurs. If the transferred call is an outside call, it is possible to select whether Transfer Recall will go to the initiating extension or to Operator 1 by System Programming.

An outside call can be translated directly to a Uniform Call Distribution (UCD) group so that an idle extension is automatically hunted by UCD.

*1 One-Touch Transfer allows you to hold an outside call and transfer it to an extension by pressing one key. This feature provides automatic hold and transfer, without pressing the TRANSFER button. System Programming is required to use this function.

User Manual

145

Page 145
Image 145
Panasonic KX-TD1232C user manual Call Transfer using a DSS button, 145, When One-Touch Transfer mode is enabled