XDVD270 OPERATION

Using the Headrest Mounts

The headrest mounts provide the convenience of mounting the main unit and the external monitor to the back of a vehicle’s headrest without any tools or modifications.

Note:

Power off the XDVD270 main unit and disconnect any external connections before attaching the headrest mounts.

Slip main unit and/or external monitor into either side of the car mount.

Close top, making sure that Velcro® closure fits snugly. Loop both belts through buckles.

Place both belts over headrest; position unit so that screen is at comfortable viewing level, then tighten belts.

Note: Be sure that mounting belts are fastened tightly to hold unit securely in case of sudden stops.

Home Use

Table Top The main unit and external monitor have a built-in easel-style stand to permit viewing in any location in the home. The stand is located on the back of both units. Place your thumb under the indentation, and pull up. The units can now be propped on a tabletop or any other solid, even surface.

19