| XDVD270 OPERATION |
|
|
| Troubleshooting |
|
|
| Problem | Action |
Unit will not turn on | Connect the AC adapter into the wall outlet securely. |
(no power) | Connect the DC adapter into the vehicle cigarette outlet securely. |
| Press the POWER button on the main unit for more than 2 seconds. |
|
|
Unit has power | Check the connections from the DVD video output to the TV or A/V receiver |
(but no picture) | video input. Make sure your TV or A/V receiver is set to the correct mode. |
| Refer to your TV or A/V receiver owners manual. |
| Make sure the Key Lock function is set to OFF. |
| Make sure the LCD monitor is turned on. Press and hold the LCD button for |
| 2 seconds to turn the LCD monitor on/off. |
| Check the A/V INT EXT switch settings. |
|
|
Unit has power | Check the connections from the DVD audio output to the TV or A/V receiver |
(but no sound) | audio input. Make sure your TV or A/V receiver is set to the correct mode. |
| Refer to your TV or A/V receiver owners manual. |
| Increase volume control on unit. |
| Unplug the headphones to hear sound from the |
| Check the A/V INT EXT switch settings. |
|
|
Picture has occasional distortion | A small amount of picture distortion may appear because of a poor quality |
| video/sound transfer to disc. |
|
|
Brightness is unstable or noises are | Physical defect in media. Check media for scratches. |
produced when playing | Connect the DVD player directly to the TV and not through any other source. |
| Avoid connecting the unit to a VCR or TV/VCR combination. |
|
|
The DVD does not start playback | Disc is loaded upside down. Place the disc in the unit with the graphics side |
| up. Place the disc on the disc spindle correctly inside the unit. |
| Make sure the disc is free from scratches and fingerprints. |
| Press the SETUP button to turn off the menu screen. |
| Cancel the parental lock function or change the parental lock level. |
| (The default password is 1234.) |
| Turn the power off then disconnect the power plug and reconnect. |
| Use discs labeled "Region 1" or "All" only. |
|
|
The unit turns off by itself | This is a function of the unit by design. As a safety feature, the main unit will |
| automatically power off after approx. 10 minutes of no activity. |
|
|
The remote control does not work | Remove and discard the clear plastic separator from the battery |
properly | compartment of the remote control. |
| Check for obstructions in front of the IR sensor on the main unit. |
| Replace the battery. |
|
|
Unit displays "Wrong Region" | This player has been designed to play DVD software that has been encoded |
| for region 1 only. Make sure the disc is labeled "region 1" or "all". |
|
|
21