XDVD8182 OPERATION
DVD Operation - Parking Brake Initialization
CAUTION !!!
IT'S UNLAWFUL TO OPERATE A VEHICLE WHILE VIDEO IS DISPLAY IN THE DRIVERS VIEWING AREA
ENGAGE EMERGENCY BRAKE
TO ENJOY VIDEO
Front TFT Video Initialization
Parking Brake Initialization Situation 1
Parking Brake Initialization Situation 2
SAFETY WARNING
•The video display of the
•Audio can be heard while the monitor is closed.
•The vehicle must be in park and the parking brake applied to view video on the
•As a safety feature, “ENGAGE PARKING BRAKE” blue screen will show on the display when the vehicle's parking brake is not engaged. Video display on the front monitor isn't allowed until the PARKING BRAKE is engaged. By connecting the yellow/blue PARKING BRAKE wire to brake switch circuit as described below, DVD and AV1 audio can be heard while the vehicle is in motion without engaging the parking brake.
Follow these two initialization procedures carefully to allow video playback on XDVD8182 front panel TFT:
There are two situations that start the PARKING BRAKE sequence.
First situation is while driving:
1)Stop vehicle, put in Park, make sure PARKING BRAKE is off/released
2)Depress PARKING BRAKE for 1 second
3)Release PARKING BRAKE for 1 second
4)Depress PARKING BRAKE permanently
Note:
Once above procedure
Second situation is while already parked and the PARKING BRAKE is already applied:
1)Keep vehicle in Park, PARKING BRAKE should be on
2)Release PARKING BRAKE for 1 second
3)Depress PARKING BRAKE for 1 second
4)Release PARKING BRAKE for 1 second
5)Depress PARKING BRAKE permanently
Notes:
Once 2nd procedure
32