Dual XDVD8285 L

XDVD8285 OPERATION

Touch to set CD/DVD mode as the Multi-Zone mode, (CD/DVD must be inserted)

Touch to set CAMERA mode as the Multi-Zone mode, if optional camera isn't

connected then "No Video Signal" will be displayed.

Touch to access BLUETOOTH mode, (BLUETOOTH must be activated first). Refer

to page 21 for more details.

Touch to RETURN to previous screen

Touch to set the Multi-Zone mode in STANDBY (Off).

Notes: When the Multi-Zone mode is set to STANDBY (Off), the video signal from

the 6.5" TFT is shown by default and the Multi-Zone audio is disabled.

Press and hold the MODE button on the front panel for more than 2

seconds to change the Multi-Zone mode from STANDBY (Off) to active.

Touch to set AUXILIARY A/V INPUT mode as the Multi-Zone mode.

Touch to set SD mode as the Multi-Zone mode, (SD card must be inserted)

Touch to access SCREEN SETUP menu

Touch to access GENERAL SETUP menu

Touch to access ASP Config menu

Touch to access CD/DVD SETUP menu, (CD/DVD must be inserted to function)

Touch to access MULTI-ZONE source menu

Touch to access MAIN source menu

RAPID DIAL can also control touch screen functions from the multi-zone menu

Select desired function rotating clockwise or counter-clockwise

Function will be outlined in yellow

Press to confirm/ENTER

•

Multi-Zone Menu Access

Touch Access Buttons

Rapid Dial

765

There are two methods to access the Multi-Zone menu

Press the MENU button on the front panel, then press Multi-Zone

Touch the upper left corner of the touch screen, then press Multi-Zone

•

2 3 4