Dukane 28A9058 Setting-Up Projector, Connecting Ac Power Cord, Projector side, AC Outlet side

PREPARATION

SETTING-UP PROJECTOR

CONNECTING AC POWER CORD

This projector uses nominal input voltages of 100-120 V or 200-240 V AC. This projector automatically selects correct input voltage. It is designed to work with single- phase power systems having a grounded neutral conductor. To reduce risk of electrical shock, do not plug into any other type of power system.

Consult your authorized dealer or service station if you are not sure of type of power supply being in use. Connect a projector with a peripheral equipment before

Eturning a projector on. (Refer to pages 12 ~ 15 for connection.)

Connect AC Power Cord (supplied) to a projector.

AC outlet must be near this equipment and must be easily accessible.

NOTE ON POWER CORD

AC Power Cord must meet requirement of country where you use a projector.

Confirm AC plug type with chart below and proper AC power cord must be used.

If supplied AC Power Cord does not match AC outlet, contact your sales dealer.

Projector side	AC Outlet side
	For U.S.A. and Canada	For Continental Europe
	Ground
To POWER CORD	To AC Outlet.
CONNECTOR on a		To AC Outlet.
	(120 V AC)
projector.
		(200 - 240 V AC)

8