Dukane 28A8945 Appendix Air Filter Care And Cleaning, Cleaning Projection Lens, Side Of Projector

APPENDIX

AIR FILTER CARE AND CLEANING

Air Filter prevents dust from accumulating on a surface of Projection Lens and Projection Mirror. Should Air Filter become clogged with dust particles, it will reduce Cooling Fans' effectiveness and may result in internal heat build up and adversely affect life of projector.

Clean Air Filter following steps below:

1	Turn power off, and disconnect AC power cord from
	an AC outlet.
2	Pull out 2 Air Filters and Air filter Covers from a
	projector.
3	Clean each parts (Air Filter and Air filter Cover) with
	brush or wash out dust and particles. Be sure to dry
	them out.
4	Replace Air Filter and Air Filter Cover properly. Make
	sure that they are fully inserted.

CAUTION

Do not operate a projector with Air Filter removed. Dust may accumulate on LCD Panel and Mirror degrading picture quality.

Do not put small parts into Air Intake Vents. It may result in malfunction of a projector.

E

BOTTOM OF PROJECTOR SIDE OF PROJECTOR

	AIR FILTER
AIR FILTER	COVER	AIR FILTER
		COVER

AIR FILTER

RECOMMENDATION

We recommend avoiding dusty/smoky environments when operating a projector. Usage in these environments may cause poor image quality.

When using under dusty or smoky conditions, dust may accumulate on liquid crystal panel, lens, or optical elements inside it. This condition may degrade quality of projected image.

When above symptoms are noticed, contact your authorized dealer or service station for proper cleaning.

CLEANING PROJECTION LENS

Follow these steps to clean projection lens:

1	Apply a non-abrasive camera lens cleaner to a soft, dry cleaning cloth. Avoid using an excessive amount of cleaner.
	Abrasive cleaners, solvents or other harsh chemicals might scratch lens.

2

3

Lightly wipe cleaning cloth over lens.

When a projector is not in use, replace lens cover.

43