USING THE VIEWER
NOTE: You can also use the and button on the remote control to select
folders or slides.
If you use the and button on the remote control for Viewer operation, press the PJ button to switch to the Projector mode and the PJ button lights red.
|
|
| SELECT |
|
E |
|
|
| L |
N |
|
|
| E |
T | E |
|
| C |
R |
| N | ||
| A | |||
|
| C |
| |
Works as the Select button on the projector.
PJ
Lit red
Auto Play Mode
If the "Auto Play" option is selected in "Viewer Options" of the menu, any given slide will start to play automatically.
You can also specify Auto Play Interval between 5 and 300 seconds.
Switching to Slides Directly from Other Input Modes
With this function it is possible to switch directly to a slide when the picture of a VCR or computer is being projected.
Example: When conducting presentations using a combination of slides and moving pictures from a VCR, etc., it is possible to switch from a Viewer slide to the video picture then back to the Viewer slide simply by using the Viewer button.
NOTE: Even if you switch the current Viewer source to another source, the cur- rent slide is retained. When you return back to the Viewer, you will get the slide that has been retained.
The PC card editing operation cannot be performed from the projector. Do so using the Dynamic Image Utility 2.0 software.
