Selecting Overscan Percentage

NOTE:

*When "Resolution" is set to "Native", "Overscan", "3D Reform", "Aspect Ratio" and "Screen" are not available.

*While you are displaying an image with higher resolution than the projector’s native resolution, "Resolution" is not available.

Select overscan percentage (0%, 5%, 10% and 25%) for signal.

NOTE: When "Resolution" is set to "Native", this feature is not available, and the stored settings and adjustments are invalid.

NOTE: When "4:3 Fill" or "Crop" is selected in "Aspect Ratio", this feature is not available.

Selecting Video Filter Level (not available for Video, Viewer and LAN)

This function reduces video noise.

Off	The filter is removed.
Less	The low-pass filter is applied partially.
More	The low-pass filter is applied fully.

Selecting Noise Reduction Level (not available for RGB, Viewer and LAN)

Select one of the three levels for reducing video noise: Low, Medium or High.

NOTE: The lower the Noise Reduction level, the better the image quality by

way of higher video bandwidth.

E-89

Dukane 8761, 8760 user manual Selecting Overscan Percentage