Dukane 8793h EASY MENU

29

EASY MENU

EASY MENU

From the EASY MENU, items shown in the table

below can be performed.

Select an item using the ▲/▼ cursor buttons. Then

perform it according to the following table.

Item Description

ASPECT Using the ◄/► buttons switches the mode for aspect ratio.

See the ASPECT item in IMAGE menu (34).

KEYSTONE Using the ◄/► buttons corrects the vertical keystone distortion.

See the KEYSTONE item in SETUP menu (41).

PICTURE MODE

Using the ◄/► buttons switches the picture mode.

The picture modes are combinations of GAMMA and COLOR TEMP

settings. Choose a suitable mode according to the projected source.

NORMAL ó CINEMA ó DYNAMIC ó BOARD(BLACK)

DAYTIME ó WHITEBOARD ó BOARD(GREEN)

GAMMA COLOR TEMP

NORMAL 1 DEFAULT 2 MID

CINEMA 2 DEFAULT 3 LOW

DYNAMIC 3 DEFAULT 1 HIGH

BOARD(BLACK) 4 DEFAULT 4 Hi-BRIGHT-1

BOARD(GREEN) 4 DEFAULT 5 Hi-BRIGHT-2

WHITEBOARD 5 DEFAULT 2 MID

DAYTIME 6 DEFAULT 6 Hi-BRIGHT-3

• When the combination of GAMMA and COLOR TEMP differs

from pre-assigned modes above, the display on the menu for the

PICTURE MODE is “CUSTOM”. Please refer to the GAMMA and

COLOR TEMP (31, 32) items in PICTURE menu.

• Lines or other noise might appear on the screen when this function

is operated, but it is not a malfunction.

(continued on next page)

Contents

Main Projector 8793H User's Manual (detailed) Operating Guide About this manual Contents Connecting with your devices Connecting to a power supply Introduction Features Checking the contents of package Part names R ear panel Control panel Page Setting up Arrangement Page Page Connecting with your devices Page Page Page Connecting to a power supply 1. 2. Using the security bar and slot Remote control About the remote control signal Installing the batteries 1. 3. 1. Turning on the power 2. 3. Power on/off 1. Turning off the power 2. Operating 1. Adjusting the volume 1. Temporarily muting the sound 1. Selecting an input signal 1. Selecting an aspect ratio 1. Searching an input signal 1. Adjusting the projector's elevator 1. 2. 3. Adjusting the zoom and focus 4. 5. 1. 2. 1. Adjusting the position 2. 1. Using the automatic adjustment feature 1. Correcting the keystone distortions 2. 1. Using the magnify feature 3. 4. 1. Temporarily blanking the screen 1. Temporarily freezing the screen 1. Using the menu function 2. 3. EASY MENU From the EASY MENU, items shown in the table Select an item using the / cursor buttons. Then perform it according to the following table. Page PICTURE menu Page Page IMAGE menu Page automatically set to the default. INPUT menu From the INPUT menu, items shown in the table Page Page Page SETUP menu From the SETUP menu, items shown in the table Page Page AUDIO menu SCREEN menu From the SCREEN menu, items shown in the table Page Page Page Page Page OPTION menu From the OPTION menu, items shown in the table Page Page Page Page Page SECURITY menu Enter to the SECURITY menu MyScreen PASSWORD 1 Turning on the MyScreen PASSWORD (continued on next page) 2 Turning off the MyScreen PASSWORD Page MY TEXT PASSWORD 1 Turning on the MY TEXT PASSWORD (continued on next page) 2 Turning off the MY TEXT PASSWORD 3 If you have forgotten your password MY TEXT DISPLAY MY TEXT WRITING Maintenance Replacing the lamp 1. 3. 7. 6. 4. Lamp warning HIGH TEMPERATURE HIGH VOLTAGE HIGH PRESSURE Page 9. Other care 1. 2. 1. 2. Troubleshooting Related messages Message Description Related messages (continued) Regarding the indicator lamps The projector is in a standby state. The projector is warming up. The projector is in an on state. The projector is cooling down. Regarding the indicator lamps (continued) NOTE Otherwise, set it to NORMAL. There is a possibility that the interior portion has become heated. It is time to clean the air lter. Resetting all settings Phenomena that may be easy to be mistaken for machine defects Page Page NOTE