Fastening the adapter cover
Use the supplied adapter cover to prevent the USB wireless adapter from coming off easily.
1. Loosen the screw (marked with triangle) on the bottom left of the USB TYPE A port.
2. Insert the tab of the cover into the hole at the upper right of the USB TYPE A port in the direction of the arrow.
3. Align the screw holes on the projector and the cover. Then insert the screw removed from the projector into the hole and tighten the screw.
1
2
3
Tab
WARNING ►Keep small parts away from children and pets. Take care not to put in the mouth.
Connecting power supply
1. Put the connector of the power cord into the AC IN (AC inlet) of the projector.
Firmly plug the power cord’s plug into the |
|
2. outlet. In a couple of seconds after the power |
|
supply connection, the POWER indicator will | AC IN |
light up in steady orange. | |
Please remember that when the DIRECT POWER | Power |
ON function activated, the connection of the power | cord |
supply make the projector turn on. |
|
WARNING ►Please use extra caution when connecting the power cord, as incorrect or faulty connections may result in fire and/or electrical shock.
•Do not touch the power cord with a wet hand.
•Only use the power cord that came with the projector. If it is damaged, consult your dealer to get a new one. Never modify the power cord.
•Only plug the power cord into an outlet whose voltage is matched to the power cord. The power outlet should be close to the projector and easily accessible. Remove the power cord for complete separation.
•Do not distribute the power supply to multiple devices. Doing so may overload the outlet and connectors, loosen the connection, or result in fire, electric shock or other accidents.
•Connect the ground terminal for the AC inlet of this unit to the ground terminal of the building using an appropriate power cord (bundled).
NOTICE ►This product is also designed for IT power systems with a phase-
8
