FOR 3000 & 4000 LUMEN MODELS —
3. Squeeze the lamp retainer clip to free lamp. Carefully pull up the used lamp. Take caution since it may be hot. Allow time to cool (Step 3).
4.Place new lamp in socket. Push down until firmly seated. Avoid skin contact. Oil from skin can cause discoloration of the lamp capsule or re- flector. Hold lamp with a cloth, tissue or gloved hand.
5.Engage the lamp retainer clip.
STEP 3 —
Open lamp retainer clip and pull out the lamp.
6.Close lamp cover and replace cover retainer clips. Replace the stage by aligning rear edge and then pushing down front until it locks in place.
TROUBLESHOOTING
Symptom | Probable Cause | Solution |
|
|
|
Neither lamp or | a. Unit unplugged | a. Plug unit into |
fan operate |
| outlet |
| b. No power at wall outlet | b. Verify outlet |
|
| has power |
| c. Stage not closed | c. Close stage |
| d. Stage installed backwards | d. Install stage |
|
| correctly |
| e. Damaged part | e. Obtain service |
|
|
|
No lamp, fan runs | a. | a. Replace lamp |
| b. Lamp changer not engaged | b. Slide changer arm |
|
| into position |
| c. Lamp not seated in receptacle | c. Seat lamp |
|
|
|
New lamp installed, | a. Defective lamp | a. Try another new |
lamp still not on, |
| lamp |
fan runs | b. Defective electrical system | b. Obtain service |
|
|
|
No fan, lamp on | a. Fan is obstructed | a. Obtain service |
| b. Fan motor has burned out | b. Obtain service |
|
|
|
9