Technical Data
General specifications | Printing specifications | Printing specifications | Location requirements |
Power supply: | Printing system: | Media types: | Maximum height: |
120/208 VAC ± 10 %, 3 phase, | Patented Durst Roll to Roll trans- | 3M High Intensity Prismatic | 2,400 m (8,000 ft) above sea level |
3 wi, 60 Hz, or | port system with Quadro® Array- | Sheeting HIP 3930 | Temperature range: |
230/400 VAC ± 10 %, 3 phase | Technology | 3M Diamond Grade Cubed | |
+ N/50 Hz | Resolution: | Sheeting DG3 4090 | +15 °C to +30 °C (+59°F to 86°F), |
Power consumption: | 3M Engineer Grade 3290I Sheeting | ||
400/600 dpi (adressable) | Maximum printing width: | Relative air humidity: | |
Maximum: 13 KVA; average: 7 KVA | 800/1200 dpi (apparent) | ||
Max. amperage per phase: | Finish: | Up to 1575 mm (62 in.) with border | 25 - 80 %, |
208 VAC: 32 amp | and no edge to edge option. |
| |
230/400 VAC: 17 amp | 3M 1170 overlay film | Max media weight: |
|
Dimensions: | Colors: |
| |
Limited only by maximum outer |
| ||
Width: approx. 505 cm (199 in.) | Rho 161 TS: CRYK | diameter of supply roll and/or max. |
|
Length: approx. 201 cm (79 in.) | Inks: | weight. |
|
Height: approx. 212 cm (83 in.) | • Lower position 1: approx. 35 cm |
| |
Space requirement: | 3M UV 8800 Inks, | up to 200 kg (445 lb.) with |
|
designed to match the traffic sign | pneumatic axle for media feeding |
| |
Approx. 7 x 5 m ( 23 x 16 ft.) | colors | and |
|
Weight: | Ink supply: | 82 mm (2.9 to 3.2 in.) |
|
• Upper position: |
| ||
approx. 2000 kg (4400 lb) | Continuous ink supply with | approx. 25 cm (9.8 in.) up to |
|
Safety standards: | ink reservoirs, refillable during | 35 kg (77 lb.) |
|
operation for large print processes. | Max. medium thickness: |
| |
Complies with currently valid | Refill ink in |
| |
guidelines | 0.15 mm up to 2.5 mm |
| |
| disposal in collapsed condition, | Medium cutoff: |
|
| avoiding pollution to the machine |
| |
| and the environment. | Approx. 40 cm (16 in.) at the |
|
| Software/RIP: | leading edge |
|
| Media cutting: |
| |
| Durst Rho User software based on |
| |
| Linux. | Mechanical guide for manual |
|
| RIP Workstation with Caldera | cutting of the roll |
|
| GrandRIP+ |
|
|
| Productivity: |
|
|
| Rho 161 |
|
|
| Up to: 65 m2/h (700 sq.ft./h) in |
|
|
| 2 Pass Mode at 400 dpi |
|
|
|
|
| |
| HP Linux Worstation |
|
|
| Operating system: |
|
|
|
|
| |
| Linux WS EM64T |
|
|
| Monitor: |
|
|
| HP TFT Monitor |
|
|
| Network Interface: |
|
|
| Ethernet 100/1000 Mbit |
|
|
Durst Phototechnik | Durst Phototechnik |
AG | Digital Technology |
Large Format Division | GmbH |
|
|
|
|
Telefon +39 04 72 81 01 11 | Telefon +43 48 52 7 17 77 |
Telefax +39 04 72 83 09 80 | Telefax +43 48 52 7 17 77 50 |
info@durst.it |
|
The latest technical developments are constantly being incorporated into Durst products. Illustrations and descriptions are therefore subject to modification. All rights reserved on images and illustrations.
© Durst Phototechnik AG, 09/2008 IX25055
