How to use your

Dymo LabelPoint 100

What LabelPoint can do for you

With the Dymo LabelPoint you can create a wide variety of high-quality self-adhesive labels. The unit can print on 3/8" (9 mm) or 1/2" (12 mm) width tapes. Dymo tape casettes are available in a wide range of colors: split back tape for easy removal from the tape.

Warranty Registration

Please complete the warranty registration card and return it to the relevant customer service address, within seven days– see the warranty booklet for details.

Getting started

STEP ONE - insert the batteries

Apply pressure to thumb catch and open hinged access door – see fig A, page 2.

Insert six size AAA alkaline batteries, observing the polarity markings A3, and close cover.

Remove batteries if the unit is to remain unused for prolonged period.

STEP TWO - insert the cassette

Slide catch B1 as shown to open cassette door B2 – see page 2.

Ensure tape and ribbon B3 are taut across mouth of cassette and tape passes between guideposts before installing as shown. If necessary, turn spool B5 clockwise to tighten ribbon.

Insert cassette and push firmly C3 until it clicks into place.

When the tape cassette is pushed firmly into place, the unit automatically adjusts the tension of the tape. You will hear a slight noise as the tape is being tightened.

Ensure tape and ribbon are positioned as shown between pinch roller C1 and print head C2.

Close door B2

STEP THREE - turn on

Turn on with the switch.

Note: The unit turns off automatically, after 2 minutes of inactivity.

3

Page 3
Image 3
Dymo 100 manual How to use your, Warranty Registration, Getting started