STEP FOUR - type a label
•Type a simple first label to try the machine. Learn more about formatting in the following pages.
STEP FIVE - print your label
•Press 
to print the label.
STEP SIX - cut the label
•Use cutter button E to cut the label – see page 2.
Congratulations! You’ve printed your first label!
Let’s go on to learn more about creating and formatting labels.
Getting to know your
LabelPoint 100
The Display
The display shows:
•Up to eleven text characters, at one time. Use or to move along the text.
•8 indicators – as shown below.
•The display will flash if you press
an incorrect key in a function sequence.
UNDLINE ITALIC LTH SET OUTLINE
CAPS | VERT |
H
Keys
ON/OFF
Turns the power on and off.
•Turns off automatically after two minutes of inactivity. The last label created will remain in memory and displayed when next turned on. Any stored last label settings will also be retained.
Note: If the batteries are removed for more than a few seconds, all text and settings will be lost.
When power is restored, the display will show a flashing cursor (no text) and the set- tings will be full height, standard width text with H and all other settings off.
CAPITALS
•Press this button, and all subsequent cha- racters will appear in UPPER CASE (CAPITALS), as confirmed by the CAPS indicator in the display.
•Press again to cancel and return to lower case.
SHIFT KEY
This has a dual action: either press and hold down or press and release to remain in "shift" position"
Press H again to return to normal state.
•Use H before pressing an alphabet key to produce an UPPER CASE (CAPS) character.
•For
•Pressing H while CAPS is set will give a lower case character.
DELETE
•Press to delete the character to the left of the cursor, or to exit certain function key operations.
CLEAR ALL TEXT | + |
•Press to clear all the current text and cancel any fixed length setting, but leave the text size and other settings unchanged. Also use to exit or clear certain function key operations.
CURSOR KEYS
•Press to move the cursor along the text, one character at a time.
•Press and hold to scan quickly through the text.
•Press H + or to move the cursor to the beginning or end of the text.
•When used in conjunction with certain
function keys, use or to select options.
•To insert characters into the text, use or to position the cursor under the character to the right of the insertion point, then type in the characters required.
PRINTING
•Press PRINT to print the label. (see extended memory, page 6)
•Use cutter button E to release the label – see page 2.
PRINT PREVIEW 
+
Allows you to preview your selected label before printing it.
•Press H + CAPS and the entire text of the selected label will scroll across the display. Note: with a 2 line label, the message will be previewed as a single line message.
BUFFER REVIEW | + |
•Press
Note: any
SPACE KEY
•Press SPACE to insert a space into the text.
SYMBOLS 
+ 
•Press H+ SPACE to select a symbol character
– see Symbols and special characters and the symbols table on page 2.
TEXT SIZE
•Press SIZE to display the six text print sizes: l condensed full height
ı condensed
4 | 5 |
