Dymo 450 TWIN TURBO quick start Loading Labels

4. Loading Labels

The LabelWriter Twin Turbo printer holds two label rolls, so you can print two types of labels without having to change the label roll. For example, load address labels on one side and DYMO Stamps postage labels on the other side.

Important!

In order for the labels to feed properly during printing, pay attention to the following when loading labels on the spool and into the printer:

•The label spool guide must be pushed flush against the label roll, with no gap. See Figure 6.

•The labels must be loaded with the left edge of the label inserted against the left edge of the label feed slot. See Figure 8.

To load a label roll

1Press the form-feed button to eject the labels that protected the printer during shipment.

2Open the top cover and remove any packing material inside the label compartment.

3Remove the label spool on the left from inside the top cover and pull the spool guide from the spindle.

SpoolSpool

spindle guide

Figure 5

4Hold the spool spindle in your left hand and place the label roll on the

spindle so that the labels feed from underneath and the left edge of the label roll is firmly against the side of the spool. See Figure 5.

5