Introduction
The Dymo 9000 Electronic Labelmaker enables you to create a wide variety of high quality
The Labelmaker uses 6mm (1/4"), 12mm (1/2"), 19mm (3/4") 24mm (1") or 32mm (11/4") wide tape cassettes in a number of label colours. Labels can be
Text can be printed horizontally or v e r t i c a l l y in a variety of sizes and styles and can be
Warranty Registration
Please complete the warranty registration card and return it to your national customer service address within seven days – see the warranty booklet for details.
Power Supply
AC ADAPTOR
•Connect the AC adaptor to socket A➊.
Use only the special AC adaptor designed for the DYMO 9000 Labelmaker.
•An internal battery will retain memory settings for up to three months. The battery is charged while the Labelmaker is connected to the AC adaptor.
Changing the cassette
•Ensure that tape and ribbon are taut across mouths of cassettes (wind the ink ribbon cassette on a little if necessary before inserting cassette).
•Insert tape cassette B➊ as shown.
•Insert correct ink ribbon cassette B➋ as shown.
Note – interlocks C➊ prevent you from inserting a 19mm (3/4") ink ribbon cassette with a 24mm (1") or 32mm (11/4") tape cassette.
•Insert cassettes with tape and ribbon positioned as shown between pinch roller C➋ and print head C➌.
•Ensure tape and ribbon are positioned correctly.
•Ensure that the lid is closed correctly or printing will not start.
•A sensor detects if a label is left in the cutter area. When this occurs further printing will be prevented until you remove the label. See ‘Troubleshooting’.
•When you change to another cassette size, the Labelmaker will prompt you to select the correct tape width installed – see CASSETTE in the SET UP function menu.
The Display | UK | |
The display shows: | ||
|
•A ‘WYSIWYG’ representation of the label you are creating in edit mode and menus for selecting functions and features.
•A status bar at the bottom of the display.
WYSIWYG
DISPLAY
STATUS BAR
Function keys
ON/OFF
Switches the power on and off.
•Switches off automatically after ten minutes if no keys are pressed. The last label created will be retained and displayed when next turned on. In addition, any stored settings will be retained.
Note: The internal battery will retain stored settings for up to three months.
CAPITALS CAPS
•Press for all subsequent characters to be in UPPER CASE (CAPITALS), as confirmed by the CAPS indicator in the status bar.
•Press again to cancel and return to lower case.
SHIFT KEY 
•Press and hold down 
before pressing an alphabet key to produce an UPPER CASE (CAPS) character.
•For dual purpose keys, press and hold 
first to produce the legend above the key.
•Pressing 
while CAPS is set will give lower case characters.
DELETE DEL
•Press to delete the character to the left of the cursor, or
to exit certain function key operations.
CLEAR
CLEAR TEXT 
+ DEL
•Press to clear all the current text but leave the text size and other settings unchanged. Also use to exit or clear certain function key operations.
ESCAPE ESC
•Press to exit certain function key operations.
NEW
NEW 
+ ESC
•Press to clear the workspace and return all settings back to their default state - eg plain text, auto size, etc.
CURSOR KEYS 
, 
, 
or 
•Press 
or 
to move the cursor along the text, one character at a time.
•Press and hold to scan quickly through the text.
3
