label), or CUT and TAB cut for easy removal from the backing tape.
LANGUAGE
•Press 
to step through the operating languages available on the Labelmaker. The SET UP display will change accordingly .
•Press 
to change to the selected language and return to edit mode. The Labelmaker will retain the chosen operating language until you change it again.
UNITS
•Press 
to choose between UNITS of measure INCHES or MM, as shown in the status bar.
PC LINK
•Press 
to select PC LINK mode when the Labelmaker is connected to a PC – see the instructions accompanying the software for details.
•The display will change to show
to confirm PC LINK mode selection. Note that the Labelmaker will not respond to the keyboard in PC LINK mode, with the exception of the ESC key.
•Press ESC to cancel PC LINK mode and return to normal operation.
Cleaning
•Check and clean the print head and pinch roller regularly.
Follow the instructions packed with the cleaning tool.
Moisten the cleaning tool with alcohol and clean the pinch roller and print head as shown D➊.
•After cleaning, store the tool in the lid D➋ for future use.
Troubleshooting
No display
•check machine is on
•check AC adaptor connected, plugged in and switched on.
No printing or poor text
•
XX" wrong cassette fitted for label to be printed. See CASSETTE option in ‘SET UP’ menu.
•
?
ink cassette missing or lid open
•➧ ➧ Lab. label not removed from cutter area - remove before printing next label
•
label tape run out – replace the cassette
•
ink tape run out – replace the cassette
• °C/°F printhead overheat safety cutout warning.
May occur if printing many labels with dense image. Stops for 3 minutes for head to cool, then resumes printing automatically.
•check correct tape and ribbon cassettes installed
•check tape cassette installed correctly
•clean the print head.
Poor cutter performance
•
cutter jammed – clear jam and clean cutter
•clean the cutter blade regularly.
Poor tab cuts
•replace tab cutter blade E➊ – remove the single screw in the top of the cutter block, then pull it straight up to remove.
WARNING – the blade is extremely sharp!
No response to print key
•!!! in the display indicates a printer jam. Press any
key to return to normal display. Open the cassette compartment and free the jam.
No success?
• Call the customer service telephone number in your country – see the warranty booklet.
In the USA, call
7
