Dymo Electronic Date/Time Stamper manual Deactivating the alarm, Using the Security Code

Stamper will emit a series of short beeps. To shut off the alarm, press

ALARM MODE.

Deactivating the alarm

1.Press ALARM MODE, then press LOCK so the "bell" icon will disappear.

2.Press ALARM MODE to return to normal display.

Using the Security Code

Setting the Security Code

1.Press and hold the Security Code button for 2 seconds.

2.Press LOCK to set the first digit, then SHIFT to move on to the next digit. Repeat this step until all digits are set.

3.Press SECURITY CODE to return to normal display. A "key" icon will appear, locking the code in.

Disabling the Security Code

12

Selecting which fields to print

1.Press the PRINT SELECT button for 2 seconds, the DATE field will start flashing

2.By pressing the SET/EDIT button you can turn the rectangle surrounding the DATE field on or off. If you wish to print the date, make sure the rectangle is on.

3.To move on to the next field press the PRINT SELECT button, and repeat instruction 2 for each subsequent field.

4.Your DYMO Electronic Date/Time Stamper can print any combination of the following items:

•Date, Time, Message [IN, OUT, PAID, REF, CFMD, RCVD] To select a different message, press the SHIFT key while in normal display.

OR • 4-digit counter + any of the two fields above

(4-digit counter will count up only)

OR • 6-digit counter + one of the fields above (6-digit counter will count up or down)

OR • 4 or 6-digit counter alone.

5.Once you have selected your stamping

9