Dymo LT100-H Caring for Your Label Maker, Release the cutter lever, To clean the cutter blade

Print head

Figure 6

Caring for Your Label Maker

Your label maker is designed to give you long and trouble-free service, while requiring very little maintenance. Clean your label maker from time to time to keep it working properly. Clean the cutter blade each time you replace the label cassette.

!The cutter blade is extremely sharp. Use caution when cleaning.

To clean the cutter blade

1. Remove the label cassette.

2. Place the tip of a ball-point pen or pencil on the black post as shown in Figure 6, and press the post down.

Press in and hold

3. While holding the post down, press and hold the cutter lever to expose the cutter blade.

4.Use a cotton ball and alcohol to clean both sides of the blade.

5.Release the cutter lever.

!You can also follow this procedure if the cutter blade becomes lodged in the forward position and will not move.

18