Dynacord Powered Mixer manual Specs powermate

specs powermate 600

Maximum Midband Output Power, 1 kHz, THD=1%, Dual Channel

into 4 Ohms	2 x 270 W
into 8 Ohms	2 x 180 W
Maximum Midband Output Power, 1 kHz, THD=1%, Single Channel
into 4 Ohms	2 x 340 W
into 8 Ohms	2 x 200 W
Rated Output Power, THD=0.1%, Single Channel
into 4 Ohms	2 x 300 W
into 8 Ohms	2 x 150 W
Maximum Output Voltage of power amplifier, no load	43 Vrms
THD at 1kHz, MBW=80kHz
MIC input to Main L/R output, +16 dBu, typical	< 0.006%
Power amplifier input to Speaker L/R output	< 0.08%
DIM 30, power amplifier	< 0.03%
IMD-SMPTE, power amplifier, 60Hz, 7 kHz	< 0.2%
Frequency Response, -3dB ref. 1kHz
Any input to any Mixer output	15Hz ... 60kHz
Any input to Speaker L/R output	30Hz ... 40kHz
Crosstalk, 1kHz
Fader and AUX-Send attenuation	> 80 dB
Channel to channel	> 70 dB
CMRR, MIC input, 1kHz	> 80 dB
Input Sensitivity, all level controls in max. position
MIC input	-74 dBu (155 ÌV)
LINE Input (Mono)	-54 dBu (1.55 mV)
LINE Input (Stereo)	-34 dBu (15.5 mV)
Power Amplifier Input	+6 dBu (1.55 V)
Maximum Level, mixing desk
MIC inputs	+ 11 dBu
Line inputs	+ 30 dBu
All other inputs	+ 20 dBu
Record Send output	+ 14 dBu
All other outputs	+ 20 dBu
Input Impedances
MIC	1.8 kŸ
2 Track Return	10 kŸ
All other inputs	> 15 kŸ
Output Impedances
Record Send	1 kŸ
Phones	47 Ÿ
All other outputs	75 Ÿ
Equivalent Input Noise,
MIC Input, A-weighted,150 Ÿ	-130 dBu
Noise, Channel inputs to Main L/R outputs, A-weighted
Master fader down	-90 dBu
Master fader 0 dB, Channel fader down	-89 dBu
Master fader 0 dB, Channel fader 0dB, Channel gain unity	-83 dBu
Signal/Noise-Ratio,
power amplifier, A-weighted	105 dB
Equalization
LO Shelving	± 15 dB / 60 Hz
MID Peaking	± 15 dB / 2.4 kHz
HI Shelving	± 15 dB / 12 kHz
Master EQ, 7-band, Stereo	± 10 dB
Phantom Power
all MIC inputs	+24 Vdc
Power Requirements
Factory preset, 50 Hz ... 60 kHz	100V, 120V, 230V, 240V
Power Consumption
at 1/8 maximum output power, 4Ÿ	450 W
Dimensions, (WxHxD), mm	455.5 x 175.8 x 340.6
Weight, including lid	13 kg
Optional
RMK-600 (Rack-Mounting-Kit PowerMate 600)	112 741
Gooseneck lamp, 12V/2.4W, 12”, XLR	112 700
FS11 (Footswitch with LED)	110 693

*Mixing desk in rated condition, Unity Gain (MIC Gain 20 dB), all faders position 0 dB, all pots in mid position, Master fader + 6dB, amplifier rated output power into 8 ohms, Dual channel, unless otherwise specified.

6 MIC/LINE + 2 STEREO LINE PowerMate600-2 230V #112959

RACK MOUNTING

The optional kit RMK-600 (# 112 741) is available for mounting the PowerMate 600 in a 19” rack. (PowerMate1000 shown in picture)

Americas

Telex Communications Inc. 12000 Portland Ave South, Burnsville, MN 55337, USA

USA:	Phone: 1-800-392-3497, Fax: 1-800-955-6831
Canada:	Phone: 1-866-505-5551, Fax: 1-866-336-8467

Latin America: Phone: 1-952-887-5532, Fax: 1-952-736-4212

Europe, Africa and Middle-East

EVI Audio GmbH. Hirschberger Ring 45, D 94315 Straubing, Germany

Phone: +49 9421-706 0, Fax: +49 9421-706 265

France: EVI Audio France S.A. Parc de Courcerin, Allée Lech Walesa, F 77185 Lognes, France. Phone: +33 1-6480-0090, Fax: +33 1-6006-5103

Asia & Pacific Rim

Japan:	EVI Audio Japan Ltd. 5-3-8 Funabashi, Setagaya-Ku, Tokyo, Japan 156-0055
	Phone: +81 3-5316-5020, Fax: +81 3-5316-5031
Australia:	EVI Audio (Aust) Pty Ltd. Slough Business Estate, Unit 23, Silverwater, N.S.W. 2128,
	Australia. Phone: +61 2-9648-3455, Fax: +61 2-9648-5585
China:	EVI Audio (HK) Ltd. 7th Floor China Minmetals Tower, No. 79 Chatham Road South,
	Tsim Sha Tsui, Kowloon, HK. Phone: +852 2351-3628, Fax: +852 2351-3329
Singapore:	Telex Pte. Ltd. 3015A Ubi Road 1, 05-10 Kampong Ubi Industrial Estate,
	Singapore 408705 Phone: +65 6746-8760, Fax: +65 6746-1206

© EVI Audio GmbH

EVI Audio GmbH · Hirschberger Ring 45 · D-94315 Straubing Phone: +49 9421-706 0 · Fax: +49 9421-706 265

Art.Nr. 163077 · Printed in Germany (DOPF/DR) · 4000/06/08 Internet: http://www.dynacord.com

SUBJECT TO CHANGE WITHOUT PRIOR NOTICE!