Using your refrigerator
REFRIGERATOR CONTROLPOWER SAVING CONTROL LIGHT SWITCH FREEZER CONTROL
Setting | the controls... |
|
|
|
|
|
Controls | forthe refrigerator and | freezer are | in the | Give | the refrigerator | time to cool down com- |
refrigerator. | When the refrigerator | is plugged | in for | pletely | before adding | food. (This may take sev- |
the first time...
1.Set the REFRIGERA- TORCONTROL to 3.
2.Set the FREEZER CONTROL to B.
Changing the control settings...
If you need to adjust temperatures in refrigerator or freezer, use the settings listed in the chart below.
should be about right for nor-
mal household refrigerator usage.
The controls will be set about right when milk or you like and when ice cream is
l Adjust the Refrigerator Control first.
l Wait at least 24 hours between adjustments. l Then adjust the Freezer Control if needed.
QUESTIONS?
CONDITIOi’k | REASON: |
| |
If Refrigerator | Door | opened | often |
Section is | Large | amount | of food added |
TOO WARM | Room temperature too warm | ||
If Freezer | Door | opened | often |
Section is | Large | amount | of food added |
TOO WARM | Very cold room temperature |
RECOMMENDED
CONTROL SETTINGS:
Freezerd
Refrigerator | 3 |
Freezer | A |
...call your
(page 15).
If Refrigerator |
| Controls | not | set correctly |
| Refrigerator |
| ||||
Section is |
| for your | conditions |
|
| Freezer |
|
| |||
TOO COLD |
|
|
|
|
|
|
|
|
|
|
|
- |
|
| ,. | ,*,, | jm.sIY.Ya.I |
| |||||
If ICE isn’t | Heavy | ice | usage |
|
| Refrigerator | 3 | ||||
MADE FASTENOUGH | Very cold | room temperature |
| Freezer |
| A | |||||
| (can’t | cycle | often enough] | ,.. _. | _ ./ | ,.._ I_ |
| ||||
C_1,. r |
| ||||||||||
If BOTHSECTIONS | Door opened | often |
|
| Refrigerator | 4 | |||||
are TOO WARM |
| Large | amount of food | added |
| Freezer |
| B | |||
|
| Very warm or very cold |
|
|
|
| |||||
|
| room | temperatures |
| u | ||||||
|
| ||||||||||
|
|
Power Saving Control...
The Power Saving Control on the Control Con- sole operates electric heaters around the door openings. These heaters help keep moisture from forming on the outside of the refrigerator.
1.Use the “CONSUMESLESSENERGY”setting when humidity is low.
2.Use the “REDUCESEXTERIORMOISTURE”setting if
moisture forms on the outside of the refrigerator. The indicator light will glow when the switch is in the “REDUCESEXTERIORMOISTURE”position,
5