Adjusting the refrigerator shelves...
To remove the shelves:
1.First,remove food from shelf.
2.Slide shelf straight out to the stop.
3.Lift front, slide shelf the rest of the way out.
To replace the shelves:
GUIDE
SHELF
1.Fit back of shelf on top of guides with wire stops on the bottom of guides.
2.Lift front, slide shelf in until it clears guide stops.
PULL OUT TO THE STOP.
LIFT THE FRONT AND PULL AGAIN.
GUIDE
To remove ihe crisper:
1.Slide crisper straight out to the stop.
2.Lift the front.
3.Slide the rest of the way out.
4.Replace in reverse order.
To remove the cover:
1.Lift front, then lift back.
2.Pull up and out.
To replace lhe cover:
1.Fit notches on back of cover into back nubs on wall of refrigerator.
2.Lower front into place.
Changing the light bulb...
1. Reach behind the control console to find bulb
2. Remove bulb.
3. Replace with a
Reversing the door swing...
You can change the hinges on your refrigerator so the doors open the other way. You will need a #20 Torx head screwdriver. Refer to the instruction sheet included with your refrigerator.
6