Keeping Your Spa Water Clean & Fresh
Once the spa has been filled to the correct level and pumps are primed and running add:
1)STAIN & SCALE REMOVER- This prevents staining, rust and corrosion, caused by metals in the source water. One bottle will treat up to 500 gallons for up to 3 months.
2)CALCIUM BOOSTER (If Needed) - Calcium booster treats the water if low calcium hardness is a problem in your area. It will help prevent equipment corrosion and foaming by raising the spa's water hardness level to an acceptable range of 120 ppm.
3)pH STABILIZER - It will properly adjust and hold the pH for up to 3 months.
Water Testing
Your Dynasty Spas Dealer is equipped to perform a thorough analysis of your spa water. Take a one liter sample to the store and they will advise you on the products necessary to properly balance and care for your spa. Unbalanced spa water can quickly damage your equipment. Your Dynasty Spas Dealer will advise you on how to protect your investment.
Balance
Spa water must have the correct chemical balance. Unbalanced water can irritate eyes, corrode the equipment, leave mineral deposits, and decrease the effectiveness of the sanitizer.
Balanced water means establishing proper balance among Total Alkalinity, pH, Calcium Hardness and Total dissolved solids.
- 17 -
