TROUBLE SHOOTING GUIDE (CONT.)
Spa is leaking
Probable Cause #1 | ...................Loose connection. |
Action | Hand tighten all disconnects and fittings. Check joints |
| and unions. |
Motor does not run
Probable Cause #1 | ...................No power to motor. |
Action | Check power switches and circuit breakers. Check |
| motor plug where plugged into control box. |
Probable Cause #2 | ...................Pump jammed from foreign matter in impeller. |
Action | Call dealer for recommended action. |
Probable Cause #3 | ...................Motor overheats on hot days while filtering. |
Action | Reprogram your controls to cycle during the coolest |
| parts of the day and on shorter cycles. (see |
| programming instructions). |
Motor runs hot |
|
Probable Cause #1 | ...................Pump ran dry. |
Action | Call dealer for recommended action. |
Probable Cause #2 | ...................Restricted suction lines. |
Action | Make sure all valves are open/clear suction of debris. |
Probable Cause #3 | ...................Improper ventilation |
Action | Insure that vents on side of spa are free and clear of |
| any debris or landscaping. Spa should also be located |
| an adequate distance from any walls or fencing for |
| good ventilation. |
WARNING!
Note: These motors will feel hot to the touch. This is normal. The Overheat Sensor will turn the motor off if there is an overload or high temperature problem.
24Dynasty Spas Operator’s Guide • www.dynastyspas.com