QUICK SETUP GUIDE

This quick set-up guide assumes some knowledge with regards to installing, connecting and using a subwoofer. We strongly recommend that you do read through the instruction manual in order to get the best performance from your Dynaudio subwoofer, even if you already have installed the subwoofer.

Installing:

•Carefully unpack the subwoofer and accessories.

•Install the battery cell in the remote control.

•Connect the processor's or receiver's subwoofer Output to either the RCA or XLR Input.

•Set the Input button to "Master" unless the subwoofer is used in a multiple subwoofer setup where another subwoofer is set as master.

•Set the Preset/Settings switch to "Store".

•Double-check all connections; now connect the supplied mains lead to the subwoofer and AC outlet.

Using:

•Controlling the subwoofer is entirely done by using the remote control. Whenever the subwoofer receives a command from the remote control, the Power status LED will blink.

•Set the mains switch on the back panel of the subwoofer to On. The Power status LED will light up green.

•The subwoofer switches to On or Standby automatically: It will switch to On when a signal presents itself, it will switch to Standby when no signal has been available for 20 minutes. When switched to Standby, the power status LED is red; switched to On, the LED is green.

It is possible to temporarily override Automatic switching: Briefly pressing the green "I" (Power On) button on the remote will switch the subwoofer to On, even if no signal is present. Note that if no music signal presents itself within 20 minutes, the subwoofer will switch back to Standby again. If you prefer the subwoofer to stay switched On all the time -regardless of Input signal- press and hold the green "I' button for 2 seconds to set to Manual Standby/On switching: The Manual status LED will light up green.

Briefly pressing the red "O" (Power Standby) button will switch it to Standby, even if a music signal is still present. Note that on the next occasion a music signal presents itself (after a 20 minute silence), the subwoofer will switch to On again automatically. If you prefer the subwoofer remains switched to Standby all the time -regardless of Input signal- press and hold the red "O" button for 2 seconds to set to manual Standby/On switching: The Manual status LED will light up green.

Pressing either the "I" or "O" button briefly, regardless if the subwoofer is switched On or in Standby mode, will set the subwoofer back to Automatic switching again:. The Manual status LED will extinguish.

•Set the subwoofers volume level by pressing the Level "+" or "-" button.

•Select the desired cross-over frequency by pressing either 60, 80, 100Hz or Flat. If cross-over frequency selection is handled by the multi-channel processor or receiver (most cases), select "Flat".

•Select the desired Phase setting by pressing either the 0°, 90°, 180 or 270° button.

•In the Ext Off mode, the very deepest bass will be filtered; this will allow the subwoofer to achieve even higher sound pressure levels. Generally speaking, this setting is best suited for movies and most music. Press the EXT On for deepest bass response, as suited for some music or movie soundtracks with extreme deep bass.

•You can store your settings in one of the 4 presets A, B, C or D. Make sure the Preset/Settings switch on the subwoofers back panel is set to "Store". Press and hold the desired Preset button for 3 seconds to store. The Power status LED will blink 3 times to confirm. Previously stored settings will have been over-written. Set the Preset/Settings switch to "lock" to prevent accidental

over-writing of the presets.

To recall a preset, simply press the desired preset button briefly.

Install and make all connections to the subwoofer and rest of the system before switching the system and subwoofer on.

5

Page 6 Page 8
Page 7
Image 7
Dynaudio BM10S manual Quick Setup Guide, Installing, Using
Page 6 Page 8

BM10S specifications

The Dynaudio BM10S is a standout subwoofer known for its exceptional sound quality and precision, making it an ideal choice for professionals in music production, film scoring, and broadcasting. As a part of the Dynaudio BM series, the BM10S has been designed to provide a seamless integration with the company's studio monitors, delivering an accurate low-frequency response that enhances overall audio performance.

One of the main features of the BM10S is its powerful 10-inch driver. This driver is engineered to produce deep bass sounds with clarity and control. The subwoofer can handle a frequency range starting from 27 Hz, allowing it to reproduce low-end frequencies effectively while maintaining a linear response. This capability is crucial in professional settings where every detail of the sound is essential, ensuring that low frequencies do not mask other vital elements in the mix.

Equipped with a built-in multi-amplification system, the BM10S features a 200-watt RMS power output. This ample power ensures that the subwoofer is capable of delivering both burst and sustained low frequencies without distortion. The intelligent design allows it to adapt to various monitoring environments, making it versatile enough for different studio setups.

The BM10S utilizes advanced DSP (digital signal processing) technology to enhance its performance further. This includes customizable EQ settings, allowing users to tailor the subwoofer’s response to fit their specific room acoustics. The ability to adjust crossover frequencies helps in blending the subwoofer seamlessly with Dynaudio monitors, offering an extended low-end presence without compromising the mid and high frequencies.

Another notable characteristic of the Dynaudio BM10S is its robust build quality. The cabinet is constructed from high-grade MDF, which minimizes resonance and vibration, ensuring that sound output remains clear and uncolored. The sleek design not only contributes to its aesthetic appeal but also ensures a practical fit in various studio environments.

In summary, the Dynaudio BM10S is a professional-grade subwoofer that boasts advanced technologies, solid performance specifications, and an elegant design. With its powerful driver, built-in amplification, and digital signal processing capabilities, it stands out as an essential tool for audio professionals seeking to achieve precision in their sound production. Whether for music mixing or multimedia applications, the BM10S meets the demands of the most discerning users.
Top Page Image Contents