Dynaudio ESOTAR2, ESOTEC owner manual To connect the midrange

Connecting the Esotec crossovers

1. To connect the woofer

XConnect terminal 1 to the – terminal of the woofer.

XConnect terminal 2 to the + terminal of the woofer.

2. To connect the tweeter

The terminals 4, 5 and 6 offer the ability to fine-tune the sound level. This makes it possible to adjust the level according to the placement of the speaker in the car and to your personal preference.

XConnect terminal 3 to the – terminal of the tweeter.

XConnect terminal 4 or 5 or 6 to the + terminal of the tweeter.

–just use one of the terminals 4, 5 or 6

–start with terminal 5 for the first setup

–use terminal 4 to increase the sound pressure level by 2 dB

–use terminal 6 to decrease the sound pressure level by 2 dB

3.To connect the midrange

The terminals 8, 9 and 10 offer the ability to fine-tune the sound level. This makes it possible to adjust the level according to the placement of the speaker in the car and to your personal preference.

XConnect terminal 7 to the – terminal of the midrange.

XConnect terminal 8 or 9 or 10 to the + terminal of the midrange.

–just use one of the terminals 8, 9 or 10

–start with terminal 9 for the first setup

–use terminal 8 to increase the sound pressure level by 2 dB

–use terminal 10 to decrease the sound pressure level by 2 dB

4. To connect the power amplifier

XConnect terminal 2 to the + terminal of the power amplifier.

XConnect terminal 3 to the – terminal of the power amplifier.

Esotec / Esotar2 Series 15